Reinforcing mesh, also known as rebar mesh, is welded wire fabric made from steel bars or wires in a grid pattern. Welded reinforcing mesh is mainly used in Slab, Road and Foundation Construction to enhance concrete tensile strength and structural integrity in concrete construction.
Metech supplies welded reinforcing mesh in compliance to Australia standard, American Standard and other international standard.
Application: Our concrete reinforcing mesh products are widely used in construction of floors, roads, pavements, driveways and buildings.
Wire material: Carbon steel.
Reinforcing Mesh Australia Standard-AS/NZS 4671:2001
We manufacture and supply welded reinforcing mesh according to Australian standards for reinforcing steel mesh AS/NZS 4671:2001. The specific standard specifies the requirement for steel reinforcing materials used in concrete.
Australia standard reinforcing steel mesh fabric types:
- F52 Mesh 4.75mm x 2.20m x 5.8m: Wire thickness 4.75mm, mesh sheet size 2.20 m x 5.8 m, hole size 200mm x 200mm. Used for reinforcement for concrete structures of moderate strength.
- F62 Mesh 6.00mm x 2.20m x 5.8m: Wire thickness 6.00mm, mesh sheet size 2.20 m x 5.8 m, hole size 200mm x 200mm. F62 mesh provides enhanced strength due to increased wire thickness ideal for higher tensile reinforcement construction projects.
- F82 Mesh 7.60mm x 2.20m x 5.8m: Wire thickness 7.60mm, mesh sheet size 2.20 m x 5.8 m, hole size 200mm x 200mm. F82 Mesh is suitable for applications requiring substantial structural support.
- F92 Mesh 8.55mm x 2.20m x 5.8m: Wire thickness 8.55mm, mesh sheet size 2.20 m x 5.8 m, hole size 200mm x 200mm. F92 Reinforcing mesh offers significant reinforcement capabilities, for heavy-duty framework construction.
- F102 Mesh 9.5mm x 2.20m x 5.8m: Wire thickness 9.5mm, mesh sheet size 2.20 m x 5.8 m, hole size 200mm x 200mm. F102 Mesh is used for most strong and durable structural construction project.
ASTM A1064/A1064M Standard Galvanized Steel Reinforcement Mesh
We manufacture and supply reinforcing steel mesh according to American standard ASTM A1064/A1064M, the wire mesh is hot dipped galvanized with excellent corrosion resistance meeting ASTM A641/A641M standard set for hot dip galvanizing.
Specification
- Dimensions: 25 x 25 x 2.05 mm
Standard
- Reinforcing Steel Wire Fabric/Mesh: ASTM A1064/A1064M
- Hot-Dip Galvanizing Standard: ASTM A641/A641M
Reinforcing Mesh for Structural Concrete
Formwork Finish
- Rough Finish: Applied to the sides of foundations.
- Smooth Finish: Applied to the sides of plinths, columns, stairs, and walls. Box out holes/form voids with dimensions of 75mm diameter by 200mm depth.
Reinforcement Mesh Types
- Mild Steel High Tensile Reinforcement Mesh: 25mm diameter wire.
- Steel reinforcement mesh: Made of wire diameter 10mm, 12mm, 16mm, and 20mm.
Concrete Specification Recommended
- Standard Concrete: 10MPa strength with 19mm aggregate.
- Blinding Layer: Minimum thickness of 50mm.
- High Strength Concrete: 30MPa strength with 19mm aggregate, suitable for plinths, columns, surface beds, bund walls, and walls. Unformed surfaces finished with a power float.
Joints
- Expansion Joints: 10mm softboard, raked out and sealed with 10x10mm polysulphide sealant.
- Construction Joints: Integrated into the surface bed.
6 x 6 x W20 x W20 Galvanized Reinforcing Mesh
- Square Hole Reinforcing Mesh: 6 x 6 inch
- Wire size: W20 x W20
- Finish: Galvanized with protective zinc layer to prevent rust and corrosion.
- Use for construction applications, including concrete slabs, foundations, and roadways.
ASTM A615 Grade 60 Reinforcing Mesh
We supply Grade 60 Reinforcing Mesh meeting Standard ASTM A615 Specifications for deformation patterns, size, and strength suitable for reinforced concrete structures. Grade 60 Reinforcement Mesh is made from steel with a minimum yield strength of 60,000 psi, ideal for high-load applications.
Specification
- 8×8 – D7/7 rebar grid.
- Square Hole Reinforcing Fabric: 8×8 inch
- D7/7: Nominal diameter of 7/8 inches
- Panel Size: 7 feet 4 inches (88 inches) x 26 feet (312 inches)
Application
- ASTM A 615 Grade 60 Reinforcing Mesh is suitable for reinforcing concrete in various construction projects, including large foundations and industrial flooring.
- Mesh panels can be used over large spans in commercial or industrial floor slabs.
- The large panel enables an efficient installation, reducing labor time and costs while ensuring structural integrity.
Hard-Drawn Reinforcing Mesh Sheets
- Sheet Size: 6 meters (length) x 2.4 meters (width)
- Panel shape: Rectangular Sheets
- Hard-Drawn Steel Material: “Hard-drawn” refers to the process of drawing steel wire through a die, this processing enhances the steel material’s resistance to tension forces.
- Application: Hard drawn wire reinforcing mesh is ideal for high tensile concrete reinforcement.
BRC Concrete Reinforcing Welded Wire Mesh-6mm
We supply BRC concrete reinforcing mesh products made from high-tensile steel wire. BRC (British Reinforcement Concrete) is a type of steel reinforcement used to strengthen concrete structure. BRC reinforcing mesh is used in various construction including slabs, retaining walls and foundations.
- Wire Diameter: 6mm
- Mesh Opening: 8×8 inch square hole grid pattern
- Material: High-strength steel wire
- Mesh Type: Welding Mesh
- Benefit: Pre-welded mesh simplifies the placement process, reducing installation time compared to traditional rebar work.
HDG Welded Steel Mesh Sheets of Rebar
Mesh Size: 50mm x 50mm
Wire Diameter: 4mm
Material: Steel
Finish: HDG
Galvanized (HDG) Remesh Panel: 4′ x 8′
Square mesh 2×2, 3×3 inch
Wire diameter 1/4″, 1/8″, and 1/16″.
Steel mesh panels designed for concrete reinforcement.
Galvanized Wire-mesh Gauge 8/8: in 4’x8′ sheets, for concrete stock applications.
Plain Steel Mesh Sheet: 4″ x 4″ mesh pattern.
Galvanized 1/4″ Rebars: 18″ in length, suitable for various construction needs.
Reinforcing Mesh GB/T 701 Standard
- Standard: GB/T 701 standard.
- Material: Grade Q235 steel, with a minimum tensile strength of 500 MPa. Suitable for reinforcing concrete applications.
- Design: The grid pattern has uniform spacing in square or rectangular.
- Finish: Black steel; zinc galvanized.